1ge+1fx snmp managed -凯发app

  • home
  • about
  • solution
  • support
  • news
  • about

    culture

    aptitude

    course

    architecture

  • fiber media converter

    epon gpon

    eoc system

    poe switch

    fiber switch

    access ethernet switch

    industrial ethernet switch

    enterprise ethernet switch

    digital video transceiver

    sfp module

  • solution 1

    solution 2

    solution 3

    solution 4

    solution 5

  • hot news

    industry news

    show browse

      1ge+1fx snmp managed

       supports snmp management, web address management and telnet management
       enable/disable optical link-loss alarm function
       four transmission modes are selectable
       comply with ieee 802.3μ 100base tx, ieee802.3 10base-t standard and 1000base-t/fx
       comply with ieee 802.1q vlan protocol
       support 10/100/1000m, full/half duplex auto-negotiation

       support mdi/mdix auto sense
       support transmission distance of up to 120km (dual-fiber)
       support over-size packets of up to 10240 byte
       support hot-swappable
       the cards work as standalone and rack-based media converters
       single-fiber and dual-fiber devices are available

      • description
      • parameters
      • solution
      • information
      •  

        hioso fc830agm series belongs to 10/100/1000m auto-adapted ethernet fiber media converter (or called photo-electrical conversion) with management function, which supports snmp protocol, remote telnet management, com port management and software upgrade. it can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.  

        10/100/1000m ethernet fiber converter is fully in compliance with 10base-t, 100base-tx, 1000base-t, 1000base-x and ieee 802.3x international standard etc. it can completely be cooperated with network card, repeaters, hub and switch etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of broadband private network and fiber optical citywide lan.

      •  

         

        multimode fiber: 62.5/125, 50/125, 100/140μm

        mm2km ormm5km

        output power: -20~﹣18dbm

        receiving sensitivity: <﹣31dbm

        distance: 0~2km or 0~5km

        connector: sc(standard)/fc(optional) /st(optional)

        type: dual-fiber

        wavelength: 850nm/1310nm

        single-mode fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm

        25km

        distance: 0~25km

        output power:-15~﹣8dbm (dual-fiber),-14~﹣8dbm (single-fiber)

        receiving sensitivity: <﹣34dbm(dual-fiber), <﹣33dbm(single-fiber)

        connector: sc(standard)/fc(optional) /st(optional)

        type: single-fiber / dual-fiber

        wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber)

        40km

        distance: 0~40km

        output power: -10~﹣5dbm (dual-fiber),-9~﹣5dbm (single-fiber)

        receiving sensitivity: < ﹣36dbm(dual-fiber),<-33dbm(single-fiber)

        connector: sc(standard)/fc(optional) /st(optional)

        type: single-fiber / dual-fiber

        wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber)

        60km

        distance: 0~60km (when less than 15km, use attenuator)

        output power:﹣5~0dbm(dual-fiber),-6~0dbm(single-fiber)

        receiving sensitivity: < ﹣36dbm

        connector: sc(standard)/fc(optional) 

        type: single-fiber / dual-fiber

        wavelength: 1310nm/1550nm(single-fiber), 1310nm(dual-fiber)

        80km

        distance: 0~80km (when less than 15km, use attenuator)

        output power:﹣8~-2dbm(dual-fiber),-3~3dbm(single-fiber)

        receiving sensitivity: < ﹣36dbm

        connector: sc(standard)/fc(optional) 

        type: single-fiber / dual-fiber

        wavelength: 1310nm/1550nm(single-fiber), 1550nm(dual-fiber)

        100km

        distance: 0~100km (when less than 15km, use attenuator)

        output power:﹣6~-1dbm

        receiving sensitivity: < ﹣38dbm

        connector: sc(standard)/fc(optional) 

        type: single-fiber / dual-fiber

        wavelength: 1310nm/1550nm(single-fiber), 1550nm(dual-fiber)

        120km

        distance: 0~120km (when less than 15km, use attenuator)

        output power:﹣5~0dbm

        receiving sensitivity: < ﹣38dbm

        connector: sc(standard)/fc(optional) 

        type: dual-fiber

        wavelength: 1550nm

          • partner
          • contact us
          • hotline: 0755-8883-4181

          © 2000-2015 hioso all rights reserved.