2fe+1fx media converter -凯发app

2fe+1fx media converter

 adaptive 10mbps and 100mbps environment, for the convenience of network upgrade;
 efficient built-in switching core, to implement flow control and reduce broadcast packets;
 providing two independent 10/100mbps adaptive switching-type twisted pair ports, to implement
electrical interface backup;
 supporting full-duplex and half-duplex transmission modes and capable of automatic
negotiation;
 supporting automatic cross of twisted pair ports, for the convenience of system debugging and
installation;
 supporting the transmission of extra-long packets (with the maximum length of 1552 bytes);
 supporting the transmission of extra-long packets over vlan;
 supporting quality of service (qos) and ensuring transmission of voip packets;
 supporting spanning tree protocol (stp) to form a redundant network;
 extremely low power consumption (less than 2w), low heat and capable of stable operation for
a long period of time;
 supporting multiple types of fiber ports such as dual-fiber multi-mode,dual-fiber single-mode and single-fiber single-mode, to satisfy the extended requirements of users.

description
parameters
solution
information

hioso fc610b is a kind of 10/100mbps adaptive fast ethernet fiber media converter (also called
optical-to-electric medium converter), which can implement mutual conversion between two independent
10base-t/100base-tx twisted pair electrical signal and 100base-fx optical signal. this type of fiber
converter can extend the transmission distance of a network from the limit of 100m (via copper wires) to
120km (single-mode full-duplex mode). fc610b supports two different types of network connection
medium types: 10/100base-tx and 100base-fx. with the application of the switching technology and
the storing & forwarding technology, the converter can implement data transmission between the two
types of network connection media. it supports transmission in dual-fiber multi-mode, dual-fiber
single-mode and single-fiber single-mode fibers.

parameters	specifications
access mode	10/100mbps
standard	ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
wavelength	850nm/1310nm/1550nm
transmission distance	dual-fiber multi-mode: 2km; dual-fiber single-mode: 25/40/60/80/100/120km; single-fiber single-mode: 25/40/60/80/100km category-5 twisted pairs: 100m
port	two rj45 ports: connected to stp/utp category-5 twisted pairs one fiber port: multi-mode – sc (fiber size: 50,62.5/125μm) single mode – sc fiber port (fiber size: 9/125μm) single-fiber single-mode – sc fiber port (fiber size: 9/125μm)
conversion mode	medium conversion, storing and forwarding mode
mac address table	i k
buffer space	1mbit
flow control	full duplex state: flow control; half-duplex state: back pressure mode
delay	9.6μs
bit error rate	<1/1000000000
mtbf	100,000 hours
led	power (power), fx link/act (fiber link/action), fx fdx (fx full duplex mode) tp1 link/act (port 1 twisted pair link/action), tp1 100 (port 1 twisted pair 100m transmission rate) tp2 link/act (port 2 twisted pair link/action), tp2 100 (port 2 twisted pair 100m transmission rate)
power	dc5v/1a (external)
power consumption	3.2w
operating temperature	-10~55°c
operating humidity	5%~90%
storage temperature	-40~70°c
storage humidity	5%~90% (non-condensing)
dimensions	24mm(h)59mm(w)98mm(d) (height * width * depth) (external power) 26mm(h)85mm(w)135mm(d) (height * width * depth) (built-in power)